LoRaWAN Industrial Water Leak Rope Sensor

The LoRaWAN Industrial Water Leak Rope Sensor uses a conductive detection cable to monitor large areas for fluid intrusion. Simply lay the rope (available in 1 m, 5 m, or 10 m lengths) across floors, trenches, or along perimeters—anywhere water contacts the cable, the sensor instantly reports a leak event to the Kibitron platform. Receive automated email or SMS alerts based on your workflow rules. Under normal conditions, the sensor “checks in” every two hours; if a leak is detected, it increases reporting frequency until the event is cleared. It also logs leak counts and duration for trend analysis. Powered by an 8500 mAh Li-SOCl₂ battery (up to five years* runtime) and housed in a weatherproof enclosure, this sensor supports over-the-air firmware updates for easy maintenance and long-term reliability.

Key Features:

• Conductive Leak Detection Rope (1 m, 5 m, or 10 m) for wide-area coverage
• Instant Leak Alerts to Kibitron with automated email/SMS notifications
• Dynamic Reporting Interval: 2-hour “check-in” under normal conditions; rapid updates during leaks
• Leak Counts & Duration Tracking for historical analytics
• Over-the-Air (OTA) Firmware Updates for remote management
• 8500 mAh Li-SOCl₂ Battery designed for up to five years* of operation
• IP65-Rated Enclosure for indoor or sheltered outdoor use

*Actual battery life varies with environmental conditions and reporting settings.

Please Note: All Kibitron LoRaWAN sensors require a LoRaWAN gateway and an active Kibitron software subscription to operate. These devices are not compatible with our RF-based gateways.

For the best experience, we recommend using our pre-provisioned LoRaWAN gateways, which arrive fully configured to communicate with the Kibitron platform.
If you need help selecting the right gateway or confirming compatibility, please contact our support team.
NB-IoT/LTE-M versions are also available for cellular applications.